A throttling globe valve uses a linear motion to move a closure member into and out of a seating surface. They have a body distinguished by a globular-shaped cavity around the port region and are designed to regulate process flow when used in conjunction with an actuator assembly. Many single-seated valve bodies use a cage or retainer-style construction to retain the seat ring, provide valve plug guiding, and provide a means for establishing particular valve flow characteristics
Series: G120
Size: 1″ to 10” (25 mm to 250 mm)
Material: ASTM A 216 WCB, ASTM A351 Gr CF8, ASTM A 351 Gr CF8M, ASTM A 217 Gr WC6, A 217 Gr WC9
Special Material: Duplex 4A, 5A, AB2, Inconel, Monel, CN7M
Seat & Disc: CS + 13% Cr. CA 15, AISI 410, AISI 304 , 316, 304L, 316L
Plug: Country Type
Gasket: P.T.F.E. / Graphite Asbestos / SPW SS With Graphite Filled
Gland Packing: Grafoil / braided Asbestos / P.T.F.E.
Pressure Rating: ASME #150, #300, #600
End Connection: Raised Flanged, Butt Weld
Construction: Bolting Bonnet
Operation: Handwheel Gear Operated, Electric Actuator
Design Standard: BS 1873 / ANSI B 16.34
Pressure Testing: BS 6755 Part I, API598
Face to Face: ANSI B 16.10 / DIN STD.
Flanged Drilling: ANSI 16.5 / DIN / IS STD.
Butt Weld: ANSI B 16.25
Quality Assurance: ISO 9001
NACE: MR 0103, MR 0175
Fugitive Emissions: ISO 15848-1, API 622
- Bolted Bonnet with spiral-wound gasket.
- Rising Stem & Rising Hand Wheel Construction.
- Seat Ring Screwed into the body (Replaceable Type) or integral type.
- It is considered to be a self-cleaning valve as when the valve lifts from the seat fluid wash off all the accumulated things and the sealing surface is always clean from debris.
- Outside Screw and Yoke (OS&Y), Rising Stem, Integral Backseat, Integral Body Flanges(as oan ption), Two Piece Self-aligning Packing Gland.
- Good throttling and shut-off capabilities.
- Can be used as a stop-check valve in case the disc is not attached to the stem.
- Non-rotating rising stem design in globe valves (2” and above) yields a 20-30% reduction in valve torque vis-à -vis the Rotating rising stem globe valves.
- Flow Regulation: Globe valves are used to control the flow of fluids through pipelines, ensuring that the flow rate and pressure are maintained at optimal levels.
- Boiler Feedwater Control: Globe valves are commonly used in power plants to regulate the flow of water into boilers, ensuring that the temperature and pressure remain within safe limits.
- Process Control: Globe valves are used in chemical processing plants to control the flow of chemicals and other substances through various stages of the production process.
- Water Treatment:Â Globe valves are used in water treatment plants to control the flow of water through filters, pumps, and other equipment.
Our Clients
